description ?125c maximum total temperature operation ?surface mount inductors designed for higher speed s witch mode applications requiring lower inductance and high current ?dual conductors allow for low inductance and high current or high inductance and lower current ?inductance range from .047uh to 0.480uh ?current range up to 42 amps ?meets ul 94v-0 flammability standard ?rohs compliant (-r option) applications ?next generation microprocessors environmental data ?storage temperature range: -40c to +125c ?operating ambient temperature range: -40c to +125c (range is application specific). ?infrared reflow temperature: +260c for 10 seconds max. pa ck a ging ?supplied in tape and reel packaging, 1700 (fp2s and fp2d) and 950 (fp2s-200 and fp2v-xxx) per reel p arallel mode pa rt inductance ocl (1) i rms (2) i sat (3) dcr (4) height volt- number ? ? amps amps ? sec (v?) (rated) 15% nom. ref. (5) single conductor fp2-s047 0.047 0.047 39.0 42.0 0.00024 3.00 0.75 fp2-s068 0.068 0.068 39.0 32.0 0.00024 3.00 0.75 fp2-s082 0.082 0.082 39.0 26.0 0.00024 3.00 0.75 fp2-s100 0.100 0.100 39.0 22.0 0.00024 3.00 0.75 fp2-s120 0.120 0.120 39.0 18.0 0.00024 3.00 0.75 FP2-S200 0.200 0.200 37.0 19.0 0.00028 5.00 0.99 fp2-v050 0.050 0.050 37.0 70.0 0.00028 5.00 0.99 fp2-v100 0.100 0.100 37.0 30.0 0.00028 5.00 0.99 fp2-v150 0.150 0.150 37.0 25.5 0.00028 5.00 0.99 double conductor fp2-d047 0.047 0.047 37.0 42.0 0.00026 3.00 0.75 fp2-d068 0.068 0.068 37.0 32.0 0.00026 3.00 0.75 fp2-d082 0.082 0.082 37.0 26.0 0.00026 3.00 0.75 fp2-d100 0.100 0.100 37.0 22.0 0.00026 3.00 0.75 fp2-d120 0.120 0.120 37.0 18.0 0.00026 3.00 0.75 series mode pa rt inductance ocl (1) i rms (2) i sat (3) dcr (4) height volt- (5) number ? ref. ? amps amps ? sec (v?) (rated) ref. ref. ref. double conductor fp2-d047 0.188 0.188 16.0 21.0 0.0013 3.00 1.50 fp2-d068 0.272 0.272 16.0 16.0 0.0013 3.00 1.50 fp2-d082 0.328 0.328 16.0 13.0 0.0013 3.00 1.50 fp2-d100 0.400 0.400 16.0 11.0 0.0013 3.00 1.50 fp2-d120 0.480 0.480 16.0 9.0 0.0013 3.00 1.50 notes: (1) open circuit inductance test parameters: 1mhz, .100vrms, 0.0adc. (2) rms current for an approximate ? t of 40? without core loss. it is recommended that the temperature of the part not exceed 125?. (3) peak current for approximately 30% rolloff at 20?. (4) dcr limits 20?. (5) applied volt-time product (v-?) across the inductor. this value represents the applied v-? at 500khz necessary to generate a core loss equal to 10% of the total losses for 40? temperature rise. flat-pac low profile inductors (surface mount) option code option code description -r rohs compliant version
mechanical diagrams single conductor notes: (1) marking sxxx = s: single conductor style, dxxx = d: dual conductor style, xxx - last three digits of part number. date code: yww = y: last digit of year, ww: week of year. (2) all dimensions are in millimeters unless otherwise specified. (3) for parallel mode operation, connect terminals 1 to 4 and 2 to 3 on pcb (use single conductor pcb layout) for series mode operation, connect terminals 2 to 4 on pcb (dual conductor model). 6 .7 0 m ax 7.2 0 m ax ( s or v ) xx x y w w t o p vie w 2 1 2.50 ( 2x ) 7. 50 6 . 50 ( 4x ) 1 2 p c b pad lay out 2 1 sc hemati c 3 . 0 ref . hei g h t mm m ax 1. 30 ref . ( 2x ) fr o nt vie w s ide vie w 1. 0 min . ( 2x ) dual conductor 6 .7 0 m ax y w w 7.2 0 m ax dxxx t o p vie w 2 1 3 4 p c b pad lay out 2.50 ( 2x ) 7. 50 3 . 00 ( 4x ) 0.5 0 2 windin g mod e 2.50 (2x) 7. 50 3 . 00 ( 4x ) 0.50 (t y p ) s eries mod e 4. 50 ( 2x ) 1. 50 1 4 2 3 1 4 2 3 3 . 00 m m m ax 1. 30 ref . ( 2x ) fr o nt vie w 1.25 ( 2x ) r e f . 1. 00 ref . sc hemati c windin g 1 2 1 windin g 2 3 4 s ide vie w ( 4x ) pa ck a ging information ko 1.5 dia min. bo ao 12.0 4.0 2.0 1.5 dia. +0.1/-0.0 a a 1.75 7.5 16.0 +/-0.3 1 2 ao=6.6mm bo=7.1mm ko=3.2mm ko=5.2mm (FP2-S200 & fp2v) a ctual size flat-pac?s flat-pac low profile inductors (surface mount) direction of feed ?
rolloff flat-pac low profile inductors (surface mount) core loss i rms derating with core loss 1000 800 600 500 400 300 200 100 80 60 50 40 30 20 10 % of applied volt- -seconds 99 98 97 96 95 94 92 90 80 70 60 50 40 20 0 % of losses from irms (maximum) 1mhz 500khz 300khz 200khz 100k h z
flat-pac low profile inductors (surface mount) visit us on the web at www.cooperet.com 3601 quantum boulevard boynton beach, florida 33426-8638 t el: +1-561-752-5000 toll free: +1-888-414-2645 fax: +1-561-742-1178 this bulletin is intended to present product design solutions and technical information that will help the end user with design applications. cooper electronic t echnologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit d istribution of any products. cooper electronic technologies also reserves the right to change or update, without notice, any technical information contained in thi s bulletin. once a product has been selected, it should be tested by the user in all possible applications. life support policy: cooper electronic technologies does not authorize the use of any of its products for use in life support d evices or systems without the express written approval of an officer of the company. life support systems are devices which support or sustain life, and whos e failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in signifi cant injury to the user. pm-4110 9/05 ? cooper electronic t echnologies 2005
|
